Highlight-color: rgba(255, 255, 255, 0); margin: 0px; color: rgb(102, 102, 102); font-family: "microsoft yahei", 宋體, Arial; font-size: 14px;">

One Product Usage:

The walk-in salt spray test room is an upgraded salt spray test room based on the ordinary traditional salt spray test box. It can not only perform ordinary salt spray corrosion tests, but also high temperature and high humidity, low temperature and low humidity, and drying tests. At the same time, all tests are conducted under salt spray corrosion conditions. It has a large volume and can accommodate large metal components. The walk-in salt spray test room allows personnel to enter and exit, making it convenient for placing and removing specimens.

II Box structure:

The outer box is made of A3 steel plate sprayed with plastic or imported stainless steel material, while the inner box is made of highly corrosion-resistant plastic material or high-grade mirror stainless steel, which can effectively resist corrosion for up to ten years;

The water circulation device adopts a portable water storage tank, which can meet the long-term salt spray corrosion test;

The experimental chamber door is equipped with a large visible window, and the insulation material is made of polyurethane rigid foam;

The system control operation buttons and other components are installed in prominent and easy to maintain positions, and the door handle is a container opening door lock for the convenience of test personnel to open the door;

The tower spray system is equipped with a salt liquid filtration system, without a crystallization nozzle, the salt spray is evenly distributed, and the sedimentation is freely adjusted.

III Test details: (Composite salt spray test)

1. Neutral test

Laboratory: 35 ℃± 2 ℃ Saturated air tank: 47 ℃± 2 ℃

2. Acid test

Laboratory: 50 ℃± 2 ℃ Saturated air tank: 63 ℃± 2 ℃

3. Moisture test

Laboratory: 40 ℃± 2 ℃, relative humidity 90%~95% R.H (equipment can meet the set temperature up to 60 ℃, relative humidity up to 98% R.H)

Heating is achieved through an inner tank style heating and humidification method, which heats up quickly and distributes temperature and humidity evenly

Saturated air tank adopts automatic water replenishing. After continuous spray for about 20 hours, water replenishing will begin. After 1-2 minutes, water replenishing will end and spray will continue

4. Drying test

Drying treatment is carried out using a blower fan, and the specimen is dried for 24 hours under standard atmospheric conditions of temperature (15 ℃~35 ℃) and relative humidity not exceeding 50%

4 Control system:

Equipped with a Korean imported "ternary" temperature and humidity touch screen, a 7-inch high-definition true color LCD touch screen, and a controller operation interface with Chinese and English options for selection. The real-time operation curve chart can be displayed on the screen, with a capacity of 1000 program segments, each segment can cycle 999 steps, and the maximum time setting for each segment is 99 hours and 59 minutes. There are 10 sets of program linking functions;

The controller panel comes standard with a 10M/100M Ethernet interface, which automatically obtains IP addresses for remote control. It supports real-time monitoring, historical curve playback, program editing, FTP upload and download, historical fault viewing, remote setting/program control, and other functions.

Five Meet the standards:

The composite salt spray test chamber meets the requirements of coating quality for appearance parts of TSH1555G and TSH3131G, ASTMB-117, GB/T2423.17-2008, GB/T 2423.18-2000 "Basic Code for Electrical and Electronic Products - Test Ka", salt spray test method, and GB/T10125-1997 GB/T10587-2006、GB10593.2-1990、GB/T1765-1979、GB/T1771-2007、GB/T12967.3-2008、GB/T5170.8-2008 And equivalent IEC, MIL, DIN and other related standards.

VI Technical parameters:

Model (CM)

GC-YW-010

GC-YW-020

GC-YW-030

GC-YW-040

GC-YW-050

Studio size

85*130*60

90*200*60

95*250*150

100*270*170

110*290*180

External dimensions

115*210*155

125*280*160

135*290*170

135*300*180

145*310*190

Power

5.0(kw)

6.5(kw)

8.0(kw)

10(kw)

13(kw)

nature

can

finger

mark

temperature range 

Room temperature+5 ℃~55 ℃

Temperature uniformity

±2℃

Temperature fluctuation

±0.5℃

Salt spray deposition amount

1～2ml/80cm2.h

Spray mode

Choose between continuous and periodic options

Test timing

1~9999 (H, M, S) adjustable

temperature

wet

degree

control

system

temperature control

Korean ternary TEMI880 touch screen

Temperature sensor

Platinum resistance PT100Ω/MV

heating system 

Fully independent system, nickel chromium alloy electric heating heater

Spray system

Tower spray device with non crystallization nozzle (finer and evenly distributed particles)

Spray time

1~9999 (H, M, S) and adjustable cycle

Salt collection

Equipped with standard funnel and standard measuring cylinder

Salt liquid filtration

Install a water quality filter at the suction tube (to prevent nozzle blockage and terminate the test)

Preheating of salt solution

The temperature of the salt solution is balanced with the temperature inside the box (so that the low temperature of the salt solution does not affect the test temperature)

send

use

material

material

Cabinet material 

A3 steel plate spray coating or imported stainless steel material

Inner box material

Imported corrosion-resistant, high-strength P V. C/Imported corrosion resistance, high strength, aging resistance and high temperature resistance P P plate or high-grade mirror stainless steel plate

Other attachments

All are made of stainless steel, copper, or materials that are corrosion-resistant and heat-resistant

Standard configuration

1 round rod, 1 V-shaped sample holder, 2 nozzles, 2 funnels, and 2 sets of measuring cylinders

safeguard

Leakage, short circuit, overheating, water shortage, end of test, overcurrent protection

supply voltage

AC380V±10％ 50Hz

Environmental temperature for use

5℃～＋30℃ ≤85％R. H

seal up

Adopting a water sealed structure, there is no salt spray overflow

Note: This test chamber complies with GB2423.17-2008, as well as equivalent IEC, MIL, DIN, ASTM, etc

This test chamber can be extended to a humid and hot salt spray chamber according to relevant standards, with a humidity range of 20-98%

Can conduct separate wet heat test or salt spray test

With the advancement of technology, the above technical information is subject to change without prior notice!