Highlight-color: rgba(255, 255, 255, 0); margin: 0px; color: rgb(102, 102, 102); font-family: "microsoft yahei", 宋體, Arial; font-size: 14px;">

 

1、 Product Introduction:

Product model: GC-PWS-50

The fatigue testing machine adopts electro-hydraulic servo automatic control technology, which is suitable for conducting dynamic and static performance tests and fatigue tests on various automotive components. The electro-hydraulic servo fatigue testing machine should fully consider the user's possible expansion of testing needs, facilitate the installation and fixation of the test piece, increase the test channel, and carry out coordinated control loading test requirements for two channels.

2、 Main technical indicators:

1. Rated test force:+/- 50kN;

2. Accuracy of test force indication: within the range of 2% -100% FS, each point is within ± 1.0%;

3. Dynamic indication fluctuation of test force: ± 0.5% FS;

4. Maximum displacement of actuator: ± 75mm; Indication accuracy ± 0.5% FS;

5. Main test waveforms: sine wave, square wave, triangular wave, ladder wave, oblique wave, various combination waves, etc;

6. Frequency range: 0.01-50Hz;

7. Pump station: 21Mpa, 70L/min, 30kW, AC three-phase, 380V.